• Adjustable Ball Valve Lockout
• Easy to use lockout device prevents accidental activation of a closed ball valve
• Adjustable design fits 1/2in (13mm) to 2in (51mm) valves
• Durable, lightweight thermoplastic material is chemical resistant and performs effectively in extreme environments
• Removable insert accommodates a wide range of handle designs and dimensions
• Works with S806 cable lockout device for the most secure fit
• Four locking holes to accept all Master Lock and American Lock safety padlocks

The post Master Lock Adjustable Ball Valve Lockout appeared first on Total Lockout.

• The Master Lock S3079 is designed to ensure OSHA compliance and peace of mind during lockout involving ball valves. By encompassing the ball valve lever, these easy-to-use, adjustable lockout devices secure against inadvertent valve activation and will enable lockout by multiple workers at each lockout point.
• Made of thermoplastic, the two halves of the device encompass the ball valve lever to secure it from inadvertent activation of the valve.
• This device is chemical resistant
• The VLO-S3079 locks valves from 51mm to 200mm in closed position.

The post Master Lock Ball Valve Lockout Fits Valves 50mm to 200mm appeared first on Total Lockout.

Material: 304 Stainless Steel & Nylon

For butterfly valves, this can be used as supplied. The clamp attaches to the butterfly valve lever, preventing the trigger handle from being squeezed.

For ball valves, this must be used with blocking arms (2 supplied)

The post Universal Valve Base Clamping Unit With 2 Blocking Arms appeared first on Total Lockout.

Material: 304 Stainless Steel & Nylon

For butterfly valves, this can be used as supplied. The clamp attaches to the butterfly valve lever, preventing the trigger handle from being squeezed.

For ball valves, this must be used with blocking arms (1 supplied)

The post Universal Valve Base Clamping Unit With Blocking Arm appeared first on Total Lockout.

Material: 304 Stainless Steel & Nylon

For butterfly valves, this can be used as supplied. The clamp attaches to the butterfly valve lever, preventing the trigger handle from being squeezed.

For ball valves, this must be used with blocking arms (not included)

Supplied with 1.5m sheathed cable

The post Universal Valve Base Clamping Unit With Cable appeared first on Total Lockout.

This single piece lockout device has an adjustable design that provides a secure fit when locking out T-handle ball valves on PVC pipes.

Fits most T-handle valves on PVC pipes 12.70 to 25.40 mm in diameter

Exclusive design features adjustable slides to ensure proper fit

Easy to apply, lock and store.

Available in 2 sizes:
12.7mm – 25.4mm
31.75mm – 50.8mm

The post Brady T-Handle Ball Valve Lockout appeared first on Total Lockout.

Material: 304 Stainless Steel & Nylon

For butterfly valves, this can be used as supplied. The clamp attaches to the butterfly valve lever, preventing the trigger handle from being squeezed.

For ball valves, this must be used with blocking arms (not included)

The post Universal Valve Base Clamping Unit appeared first on Total Lockout.

• Seal Tight Handle-On Ball Valve Lockout
• Clamps tight on handle stop to prevent handle movement
• For valve diameters of 1/4in (6mm) to 4in (101mm)
• Works on insulated pipes and in close quarters
• Durable aluminum and steel construction defies corrosive environments and extreme temperatures
• Works with all Master Lock and American Lock safety padlocks and lockout hasps
• Lightweight and compact for easy carrying and storage

The post Master Lock Handle-On Ball Valve Lockout appeared first on Total Lockout.

Product Features

• 1/4 Turn Ball Valve Lockout
• Fits manual, quarter turn ball valve handles to protect against accidental opening
• S3476 fits valves between 1/4in (6mm) to 1in (25mm) diameter
• Easy to use one piece design locks valve in OFF position
• Compact size can easily be stored or carried
• Two rows of lock out points allow for a secure fit
• Heat resistant powder coated metal body

The post Master Lock Wedge-Style Ball Valve Lockout Small appeared first on Total Lockout.

Standard ball valve isolation to lock your ball valves from 50mm (2″) to 200mm (8″)

Made from good quality high strength thermal plastic.

This lockout device will only lock the valve in the closed position.

Work temperature -45°C to + 180°C

These simple, easy to use lockouts clamp over the valve lever, preventing the valve from operating, and lock in place using a safety padlock

The post Ball Valve Lockout 50mm to 200mm appeared first on Total Lockout.